Satel INT-KSG Manual do Utilizador descarregar pdf (Página 10)

8 INT-KSG SATEL

For security considerations, the installer can reduce the number of zones that the user

is authorized to bypass.

5.3 Viewing all events

1. Enter the code and confirm with the

key

2. Press in turn the 5 and 2 keys. The last event which occurred in the system will be

displayed.

3. You can scroll through the event log using the and keys. Use the key to exit

the function.

5.4 Checking the system status

1. If the yellow LED is blinking, enter the code and confirm with the key.

2. Touch the 7 key. The list of troubles will be displayed. Additionally, if the G

RADE

(INTEGRA) / G

RADE

3 (INTEGRA Plus) option is enabled, the list contains information on

alarms, bypassed zones and partition status. Use the and keys to scroll through

the list. To quit the function, use the key.

5.5 Setting the system time and date

1. Enter the code and confirm using .

2. Use the key to scroll through the menu until the S

ET TIME

function is found. Having

selected the function, touch the or key to start it.

3. The currently programmed time will be displayed. To reset it, touch any number key and

enter a new time (hour, minutes and seconds). If only selected digits are to be corrected,

use the key to move the cursor over the digit that is to be modified and touch the key

with the digit that is to be entered instead. To move the cursor back, use the key.

4. Confirm the time, using the or key, or touch the key to cancel programming the

clock.

5. If the time has been confirmed, the currently programmed date will be displayed. Touch

any key to reset the date and enter a new one (day, month and year). If only selected

digits are to be corrected, use the key to move the cursor over the digit that is to be

modified and touch the key with the digit that is to be entered instead. To move the cursor

back, use the key.

6. Confirm the new date, using the

or key, or touch the key to cancel programming

the date, however the time programmed in the previous step will be saved to the control

panel.

6. Macro commands

The installer can define 4 groups of macro commands (up to 16 macro commands in a

group). The name of each group is presented at the display bottom, just above the keys (if

the installer has not assigned any macro command to a group, its name is not displayed).

Depending on how the keypad has been configured by the installer, touching the

key will:

 display a list of macro commands for the given group (see Fig. 2). Use the

and

keys to navigate through the list. Use the and keys to display macro commands

1 2 ... 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Satel INT-KSG Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Teclados numéricos Satel INT-KSG