Satel INTEGRA Plus Especificações

TCP/IP Communication Module ETHM-1 Firmware version 1.05 ethm1_en 03/13 SATEL sp. z o.o. ul. Schuberta 79 80-172 Gdań

8 ETHM-1 SATEL  MOBILEKPD2 application. Values from 1 to 65535 can be entered. The value must be different from that entered for the other ports. By

SATEL ETHM-1 9 Encrypted integration [Coded integr.] – if this option is enabled, communication with other systems is encrypted. The integration encr

10 ETHM-1 SATEL Fig. 6. DLOADX program: settings of the virtual keypad available in the GUARDX program, web browser or mobile phone. 5.3 Macro com

SATEL ETHM-1 11 5.3.1 Parameters and options Fig. 7. DLOADX program: macro command groups programmed for the MOBILEKPD2 PRO application. Macro co

12 ETHM-1 SATEL command at once (if the AUTHORIZATION REQUIRED option is enabled, authorization by means of a code will be necessary). Fig. 8. DLOAD

SATEL ETHM-1 13 Using the MOBILEKPD2 PRO application you can control the KNX system, provided that the INT-KNX module is connected to the control pan

14 ETHM-1 SATEL 6 Remote Programming and Operation of the Control Panel via Ethernet Network After three consecutive attempts to establish communicat

SATEL ETHM-1 15  key for data encryption (identical to that programmed in the module for communication with the GUARDX program);  address of the

16 ETHM-1 SATEL  program the number of TCP port which will be used for communication with the web browser, if it is to be different than 80 (PORT WW

SATEL ETHM-1 17 3. When the login screen is displayed, enter in the appropriate fields:  the key for data encryption (identical to that programmed

WARNINGS The module should be installed by qualified personnel. Read carefully this manual before proceeding to installation. Changes, modifications

18 ETHM-1 SATEL 6.3.4 Establishing communication – MOBILEKPD2 Touch the name of alarm system. The virtual keypad will be displayed, which can be used

1 General The ETHM-1 module enables the INTEGRA, INTEGRA Plus and VERSA alarm control panels to communicate via the Ethernet (TCP/IP) network. The d

2 ETHM-1 SATEL 3 Electronics Board Fig. 1. Module electronics board. terminals: +12V - power input (+12 V DC). COM - common ground. TMP - tam

SATEL ETHM-1 3 Connection to the public network may only be done through a router or xDSL modem. The module should be installed indoors, in spaces wi

4 ETHM-1 SATEL Fig. 3. Schematic of the cable used to connect the RS-232 ports of ETHM-1 module and INTEGRA / INTEGRA Plus control panel with RJ typ

SATEL ETHM-1 5 5.1 Module settings The module settings can be configured as follows:  module connected to the INTEGRA / INTEGRA Plus control panel

6 ETHM-1 SATEL Fig. 4. DLOADX program: settings of the ETHM-1 module connected to INTEGRA control panel. DloadX DloadX->ETHM connection [Connect

SATEL ETHM-1 7 DloadX key [Key (DloadX)] – a string of up to 12 alphanumeric characters (digits, letters and special characters) defining the key for